I have a spare racecar to sell (trying to fund buying an FC!)
the car is a 90 Tub, built from another one after the original car was written off.
the tub has ~170,000, but all of the driveline components came from a ~70,000 car that was first built(hit in front corner, bodywork not worth it)
2009 NASA National SSM championship car
1.6 miata Setup for SSM (seal in place on head cover and AFM)
Full spec miata suspension kit.
Full welded in custom cage (actually quite a nice cage in the car)
4.3 torsen rearend
Factory hardtop bolted in place.
current motor could be rebuilt for best performance, but still runs great.
NASA and SCCA logbooks. Need new tech obviously
outdated harness in the Ultrashield Rally sport seat. car set up for 5'8"-6' currently
(its dirty, check back tomorrow for clean pics, once its daylight again)
The car is a great starter racecar, trackday toy, or adventure into chumpcar racing.
For chump, the main changes are the suspension kit and swaybars.
Otherwise if you desire to take it SM racing or track days I have a Racing beat 1.6 intake and custom SM exhaust made from a magnaflow muffler.
It will come with a box of almost a complete set of suspension arms and various other spares.
the car has a set of Team Dynamics Pro race 2 white wheels (15 x 7 et 30) on it now, and there is a set of Pro race 2 dark grey wheels that come with as spares.
it has 2 sets of well used R888's(205/50R15) on the car right now, but i have a few sets of used RA1's you can have as well.
For this package I am looking for $4400 which is a great deal for a ready to roll racecar.
This is a racecar, not a street car, it can not be converted back. NO!
I also have 2 sets of KZ-M wheels,
one with fairly worn RA1's $350
One with good tread RA1's used as rains $425
Spare Momo start 2002 seat in blue, Great condition. $250
And then there is the spare smurf drivers door, no window track, but a good clean straight door $70
the car is a 90 Tub, built from another one after the original car was written off.
the tub has ~170,000, but all of the driveline components came from a ~70,000 car that was first built(hit in front corner, bodywork not worth it)
2009 NASA National SSM championship car
1.6 miata Setup for SSM (seal in place on head cover and AFM)
Full spec miata suspension kit.
Full welded in custom cage (actually quite a nice cage in the car)
4.3 torsen rearend
Factory hardtop bolted in place.
current motor could be rebuilt for best performance, but still runs great.
NASA and SCCA logbooks. Need new tech obviously
outdated harness in the Ultrashield Rally sport seat. car set up for 5'8"-6' currently
(its dirty, check back tomorrow for clean pics, once its daylight again)
The car is a great starter racecar, trackday toy, or adventure into chumpcar racing.
For chump, the main changes are the suspension kit and swaybars.
Otherwise if you desire to take it SM racing or track days I have a Racing beat 1.6 intake and custom SM exhaust made from a magnaflow muffler.
It will come with a box of almost a complete set of suspension arms and various other spares.
the car has a set of Team Dynamics Pro race 2 white wheels (15 x 7 et 30) on it now, and there is a set of Pro race 2 dark grey wheels that come with as spares.
it has 2 sets of well used R888's(205/50R15) on the car right now, but i have a few sets of used RA1's you can have as well.
For this package I am looking for $4400 which is a great deal for a ready to roll racecar.
This is a racecar, not a street car, it can not be converted back. NO!
I also have 2 sets of KZ-M wheels,
one with fairly worn RA1's $350
One with good tread RA1's used as rains $425
Spare Momo start 2002 seat in blue, Great condition. $250
And then there is the spare smurf drivers door, no window track, but a good clean straight door $70
Aucun commentaire:
Enregistrer un commentaire