Ok where do I start,
For sale is a complete setup including ecu, wiring, dry sump tanks/pipes/fittings etc etc
This engine was rebuilt by Jim Highs of JB Performance (Orlando, Florida) in 2004 for a guy by the name of Maynard Voightman who raced this engine in a Ralt I believe, I have got some emails back and forth from the above mentions dated back then about the work done etc and also some emails about the history of this particular engine stating who bought/sold and owned it throughout it's life in the states. I have Emails also stating that the engine only ran for 3hours after its rebuild and that its last race was at the Sebring before it was sold. The car then found it's way to Australia where it was restored to it former glory and a cosworth motor put back in, the 4age was then fitted to an AE86 track car in which never or much use as the first couple of times it went out it broke the gearbox until he put in a full sequential setup which even still it has been estimated in all its time in that car has done less than 2 hours actual work this is according to the owner.
?
This engine made 220.5hp @9300rpm when it was running on twin 45mm webers with dyno sheet to prove although the engine is now fuel injected I do not have a dyno sheet.
?.
?
I removed this engine myself from the pictured ae86 (8/3/2015) so I can assure you it's got everything needed to put it back in an ae86 or any other car for that matter.
I took detailed photos of the removal of everything as well as labelling all the ecu wires to make life a lot easier when putting this back together.
?
?
?
?
4AGE FORMULA ATLANTIC ENGINE PACKAGE INCLUDES:
?
-Jenvey individual throttle bodies with carbon trumpets on a TRD adaptor plate.
?
-Jenvey fuel pressure regulator.
?
-Toda Racing 4-2-1 exhaust headers with magnaflow box and side exit exhaust (AE86 fitment).
?
-Dry Sump kit (swift valve cover/sump pan/oil pump/every oil line).
?
-Oil cooler with all the lines.
?
-Distributor with new cap, rotor arm and TRD plug leads.
?
-Modified starter with heat shield.
?
-Alternator.
?
-Super lightweight flywheel.
?
MANAGEMENT:
?
-Motec m48.
?
-Complete wiring harness including ecu holder.
?
-Knock Link knock warning system with LED warning including mounting hardware.
?
ADDITIONAL EQUIPMENT:
?
-Dry sump oil tank with mounting hardware.
?
-Breather tank with mounting hardware.
?
-Solid engine mounts.
?
-Modified Crossmember (From an AE86).
?
-Every oil line which are made top quality braided with anodised blue/red fittings.
?
EXTRA INFORMATION AND NUMBERS:
?
-Oil pressure: 6bar on idle.
?
-Leakdown test: 4/6% @35psi.
?
-Compression: Above 200psi across the board.
(Picture evidence of the above figures from the day engine was removed 8/03/2015)
?
I've no doubt missed a lot of things as I'm just going from memory typing this but basically this is a complete plug and play setup Frmula Atlantic setup.
This setup is located in Perth Western Australia but I am more than happy to arrange shipping at buyers expense.
Asking Price: $21,500.00 AUSTRALIAN DOLLARS ONO
Any further questions please don't hesitate to contact me.
Damomurphy@hotmail.com
+61459191955
(Please excuse if any pictures come up randomly As I'm trying to do this on an iPhone and it's not playing ball)
?
?
?
For sale is a complete setup including ecu, wiring, dry sump tanks/pipes/fittings etc etc
This engine was rebuilt by Jim Highs of JB Performance (Orlando, Florida) in 2004 for a guy by the name of Maynard Voightman who raced this engine in a Ralt I believe, I have got some emails back and forth from the above mentions dated back then about the work done etc and also some emails about the history of this particular engine stating who bought/sold and owned it throughout it's life in the states. I have Emails also stating that the engine only ran for 3hours after its rebuild and that its last race was at the Sebring before it was sold. The car then found it's way to Australia where it was restored to it former glory and a cosworth motor put back in, the 4age was then fitted to an AE86 track car in which never or much use as the first couple of times it went out it broke the gearbox until he put in a full sequential setup which even still it has been estimated in all its time in that car has done less than 2 hours actual work this is according to the owner.
?
This engine made 220.5hp @9300rpm when it was running on twin 45mm webers with dyno sheet to prove although the engine is now fuel injected I do not have a dyno sheet.
?.
?
I removed this engine myself from the pictured ae86 (8/3/2015) so I can assure you it's got everything needed to put it back in an ae86 or any other car for that matter.
I took detailed photos of the removal of everything as well as labelling all the ecu wires to make life a lot easier when putting this back together.
?
?
?
?
4AGE FORMULA ATLANTIC ENGINE PACKAGE INCLUDES:
?
-Jenvey individual throttle bodies with carbon trumpets on a TRD adaptor plate.
?
-Jenvey fuel pressure regulator.
?
-Toda Racing 4-2-1 exhaust headers with magnaflow box and side exit exhaust (AE86 fitment).
?
-Dry Sump kit (swift valve cover/sump pan/oil pump/every oil line).
?
-Oil cooler with all the lines.
?
-Distributor with new cap, rotor arm and TRD plug leads.
?
-Modified starter with heat shield.
?
-Alternator.
?
-Super lightweight flywheel.
?
MANAGEMENT:
?
-Motec m48.
?
-Complete wiring harness including ecu holder.
?
-Knock Link knock warning system with LED warning including mounting hardware.
?
ADDITIONAL EQUIPMENT:
?
-Dry sump oil tank with mounting hardware.
?
-Breather tank with mounting hardware.
?
-Solid engine mounts.
?
-Modified Crossmember (From an AE86).
?
-Every oil line which are made top quality braided with anodised blue/red fittings.
?
EXTRA INFORMATION AND NUMBERS:
?
-Oil pressure: 6bar on idle.
?
-Leakdown test: 4/6% @35psi.
?
-Compression: Above 200psi across the board.
(Picture evidence of the above figures from the day engine was removed 8/03/2015)
?
I've no doubt missed a lot of things as I'm just going from memory typing this but basically this is a complete plug and play setup Frmula Atlantic setup.
This setup is located in Perth Western Australia but I am more than happy to arrange shipping at buyers expense.
Asking Price: $21,500.00 AUSTRALIAN DOLLARS ONO
Any further questions please don't hesitate to contact me.
Damomurphy@hotmail.com
+61459191955
(Please excuse if any pictures come up randomly As I'm trying to do this on an iPhone and it's not playing ball)
?
?
?
Aucun commentaire:
Enregistrer un commentaire