1981 Z16 Citation with a freshly rebuilt and dyno’d engine (0 race hours - only dyno hours). The car is currently setup for SCCA CF/FF with Penske shocks and an aluminum head. The car qualifies for vintage racing under Monoposto rules (I have this confirmed in writing). I also have Bilstien shocks and cast iron heads for running Vintage. The Bilsteins will need to be revalved for the current spring rates.
The car has been carefully gone through and only needs belts and tires to race. It's not a beauty queen but looks good. The previous owner (a seriously smart car guy) spent 10 years tweaking this car to get it to be as safe and fast as possible. His notes, reports, and correspondence are included as well as all log books since new. This is a well-developed Z16.
Included with the car:
- Z16 Body molds: 1 nose mold, 1 tail mold, 1 center body mold
- All molds for the forward crush box
- Large collection of spare tubes, uprights, weldments, and rockers for the Z16
- (2) sets of Panasport Wheels
- (1) set of Compumotive wheels
- (20) MK9 gear sets (4 currently installed in car)
- (4) Bilstien shocks, not valved for current spring rates
- (1) Cast iron cylinder head
- Tires: existing tires are only recommended for a test & tune
I have shot a video of the car with the body on and off. Please PM me for a link to the video and for more detailed information about the car.
Located in SW CT. $12,000.00 obo
Also for sale: 2014 Legend V-Nose Trailer. I bought this trailer specifically for the Z16. It's all aluminum, weight 1550 empty with a >7000lb capacity thanks to the dual axles. I did a lot of research on trailers and the Legends were at the top in quality and features. For more info, here is link to the Legend website: http://ift.tt/1gD6cuC
For me, the all-alu construction meant I could tow with a standard SUV with a 3k towing capacity. Purchased new last July from a Legend dealer in PA. I drove it home, parked it, and have not used it since (i.e., <500 miles). Sells for over $7000.00 new.
Includes all documentation. $6000.00
Finally, I have the following FF components:
- Spare Ford 711m blocked motor
- (2) Cast iron cylinder heads
- (1) Aluminum head (on spare motor)
- Spare Weber carb (almost new)
- (1) set of Panasport Wheels
- (2) spare manifolds
- Spare S/S header collector
- Used AIM data system, not installed
- A variety of loose Ford Motor parts, gaskets, and rebuilding tools
I'll consider a package deal for everything. Please communicate via PM or e-mail.
The car has been carefully gone through and only needs belts and tires to race. It's not a beauty queen but looks good. The previous owner (a seriously smart car guy) spent 10 years tweaking this car to get it to be as safe and fast as possible. His notes, reports, and correspondence are included as well as all log books since new. This is a well-developed Z16.
Included with the car:
- Z16 Body molds: 1 nose mold, 1 tail mold, 1 center body mold
- All molds for the forward crush box
- Large collection of spare tubes, uprights, weldments, and rockers for the Z16
- (2) sets of Panasport Wheels
- (1) set of Compumotive wheels
- (20) MK9 gear sets (4 currently installed in car)
- (4) Bilstien shocks, not valved for current spring rates
- (1) Cast iron cylinder head
- Tires: existing tires are only recommended for a test & tune
I have shot a video of the car with the body on and off. Please PM me for a link to the video and for more detailed information about the car.
Located in SW CT. $12,000.00 obo
Also for sale: 2014 Legend V-Nose Trailer. I bought this trailer specifically for the Z16. It's all aluminum, weight 1550 empty with a >7000lb capacity thanks to the dual axles. I did a lot of research on trailers and the Legends were at the top in quality and features. For more info, here is link to the Legend website: http://ift.tt/1gD6cuC
For me, the all-alu construction meant I could tow with a standard SUV with a 3k towing capacity. Purchased new last July from a Legend dealer in PA. I drove it home, parked it, and have not used it since (i.e., <500 miles). Sells for over $7000.00 new.
Includes all documentation. $6000.00
Finally, I have the following FF components:
- Spare Ford 711m blocked motor
- (2) Cast iron cylinder heads
- (1) Aluminum head (on spare motor)
- Spare Weber carb (almost new)
- (1) set of Panasport Wheels
- (2) spare manifolds
- Spare S/S header collector
- Used AIM data system, not installed
- A variety of loose Ford Motor parts, gaskets, and rebuilding tools
I'll consider a package deal for everything. Please communicate via PM or e-mail.
Aucun commentaire:
Enregistrer un commentaire