mardi 29 décembre 2015

Insultherm Techflex Tubing

I have several 25' spools in different diameters that I would prefer to sell as a package. I have had this stuff for sometime but it has been in a box in my shop and now my garage.

The individual purchase price would be about $700 and I am willing to let it all go for $350 or best offer. Please see the spreadsheet for the list of items.

Attached Images
File Type: jpg IMG_2200.jpg (106.1 KB)
File Type: jpg IMG_2204.jpg (127.8 KB)
File Type: jpg IMG_2205.jpg (90.8 KB)
File Type: jpg IMG_2206.jpg (78.2 KB)
File Type: jpg IMG_2207.jpg (106.8 KB)
File Type: jpg IMG_2208.jpg (99.2 KB)
File Type: jpg IMG_2209.jpg (105.1 KB)
File Type: jpg IMG_2210.jpg (108.4 KB)
File Type: jpg IMG_2211.jpg (93.6 KB)
Attached Files
File Type: pdf Racing Tubing.pdf (188.4 KB)


Insultherm Techflex Tubing

Longacre Roll-off Levelers for 2-1/2" scale pads Model 72905

Roll your car off the scale pads, then back on again to release any side bind
Rigid formed aluminum construction
6 HD swivel screw-in feet for easy leveling on most any surface
Wheel stops on two roll-offs for safety
Set of 4 for 2-1/2" scale pads

Originally purchase fore $995 slightly used but in good condition asking $450

Attached Images
File Type: jpg IMG_0133[1].jpg (113.8 KB)
File Type: jpg IMG_0132[2].jpg (100.8 KB)
File Type: jpg IMG_0134[1].jpg (115.0 KB)
File Type: jpg IMG_0135[1].jpg (100.2 KB)


Longacre Roll-off Levelers for 2-1/2" scale pads Model 72905

roll hoop bending

:checkered: Hi I have a hard time finding anyone that can bend a 1.375 (1 3/8) roll hoop for a formula car, most guys around have the 1.5 die. Anyone knows how can do this? Thanks Thor


roll hoop bending

Getting Back in the Seat!

After 25 years I'm finally getting back in the seat! I just purchased a nice BRD with a good history. I'm sure the car will be faster than me until I get used to it again. I'm really looking forward to next season!








Getting Back in the Seat!

bright nickel plater???

Hi all,
I'm looking for shop that can polish and bright nickel plate some pieces for my Eagle Formula Ford.
We made some new pieces and we want them to look nice. Something between an industrial finish and a full blown concours finish. We are in Kentucky but location not too important.
Thanks Wes


bright nickel plater???

lundi 28 décembre 2015

Annular Throughut Bearing Body - new?

I bought a bunch of bits and pieces from a race shop a while back, here I'm offering what has been identified as a "...Saab T/O (throw out) with Tilton adapter, but missing center piston. Used on Staffs. Taylor Racing sells them also". Appears unused.

$60 and I'll pay USPS Priority Mail shipping to a USA address, PayPal OK/Preferred, no fee.

See listing #61324: "Need help identifying this annular throwout bearing housing" in General Formula Car Discussion)

Thanks

Tom Duncan

Attached Images
File Type: jpg DSC_6461.jpg (83.2 KB)
File Type: jpg DSC_6462.jpg (91.6 KB)


Annular Throughut Bearing Body - new?

3X Van Diemen Radiators

I have three used radiators that came to me with an RF98K Van Diemen Formula Ford. They don't fit the sidepods as they are too tall. As the car had custom made low-drag sidepods I suspect these were the originals to the car that had more room in the original sidepods.

They each measure 19-3/4' long (exclusive of fittings/outlets), 8-1/2" tall and 2-3/16" thick (the frame, not the core, which is thinner). They each weigh about 3.5lbs, outlets are 1-1.4" OD. #s 1 and 2 each have a pin sticking out the top, don't know what it's for. Each has a bleed bung welded in on one end.

Each is well used as you can see though #3 is in better apparent condition. I put 14lbs of pressure in each one and found no leakage. That is no guarantee of integrity, just what I found with that simple test. I have never used them in a cooling system. In my opinion these are not first line units (except for #3) but they could be good spares/backup to get you through a weekend.

$100 for #3, $75 each for numbers 1 and 2, buyer pays shipping, PayPal OK/preferred. Shipping from California Zipcode 95949, most likely FedEx Ground would be the way to go.

Thanks for looking

Tom Duncan

Attached Images
File Type: jpg DSC_1510T.jpg (35.4 KB)
File Type: jpg DSC_1511T.jpg (34.3 KB)
File Type: jpg DSC_1512T.jpg (36.3 KB)
File Type: jpg DSC_1513T.jpg (33.8 KB)
File Type: jpg DSC_1514T.jpg (34.2 KB)
File Type: jpg DSC_1515T.jpg (34.1 KB)


3X Van Diemen Radiators