I am having a bit of fuel seeping from one of the cover screws. Looking at the gasket design, it looks like there is really no way for the gasket to seal the screw with the oval style hole going into the float area. I looked and all the gaskets in the rebuild kits seem to be this way. Is this common or can I use a sealer for the screw?
Also, is there a better barb fitting setup for the fuel inlet? I have to really crank down on the hose clamp (1/4" hose) and it still seeps a little.
Also, is there a better barb fitting setup for the fuel inlet? I have to really crank down on the hose clamp (1/4" hose) and it still seeps a little.
Carb Question
Aucun commentaire:
Enregistrer un commentaire