Hi I have some Zink Z10 ‘s in Australia and am a little lost on setup, I had been following the recommendations on here , 900lb springs and getting the car as low as possible (we are only allowed to go down to 40mm) .
After helping a friend set up a RF88 that come from the US I realized, the tyres we run here, Dunlop CR82 are a fair bit taller than the America Racers or Hosiers. So I may be aiming for the wrong ride height and setup
The tyre dimensions are below
Size Diameter Overall Width Tread Width Revs Per Mile
mm inch mm inch mm @100 mph
135/545-13 550 21.7 190 7.5 135 935
165/580-13 585 23 220 8.3 165 883
Any suggestions would be appreciate
After helping a friend set up a RF88 that come from the US I realized, the tyres we run here, Dunlop CR82 are a fair bit taller than the America Racers or Hosiers. So I may be aiming for the wrong ride height and setup
The tyre dimensions are below
Size Diameter Overall Width Tread Width Revs Per Mile
mm inch mm inch mm @100 mph
135/545-13 550 21.7 190 7.5 135 935
165/580-13 585 23 220 8.3 165 883
Any suggestions would be appreciate
Aucun commentaire:
Enregistrer un commentaire