I'd like to be able to pre-lube my engine without the standard 'pull-the-plugs / crank the engine until you have oil pressure routine.
Considering an Accusump type system or an auxiliary oil pump spun by a drill or electric motor.
Would also like to pre-heat my oil while circulating it before firing up the engine.
Considering an electric water pump with an inline coolant heater to pre-heat coolant.
Trying to avoid cold-dry starts and the inherent wear on the internals. Not many hot days up here. Many chilly mornings.
What's the collective wisdom have to say ?
TGI !
Considering an Accusump type system or an auxiliary oil pump spun by a drill or electric motor.
Would also like to pre-heat my oil while circulating it before firing up the engine.
Considering an electric water pump with an inline coolant heater to pre-heat coolant.
Trying to avoid cold-dry starts and the inherent wear on the internals. Not many hot days up here. Many chilly mornings.
What's the collective wisdom have to say ?
TGI !
Aucun commentaire:
Enregistrer un commentaire