Bits and parts that do not fit my particular Club Ford. Please make me some offers. If you suspect I don't have the dimensions exactly right, please feel free to ask.
Brake Calipers, 2 larger and 2 smaller. The larger seem to be Girling, as that seem to be a G in the center. I don't know what the smaller ones are. $50 each
Brake Pads, lots of 'em! At least two Red sets (4 pads = 1 set) appear to be KFP. The larger ones fit the larger calipers, above, and the smaller ones fit the small calipers above. The larger ones are approx. 2-7/16" x 2" (+the ears with holes), from holes center to center they are 1-7/8"; smaller 2-1/8" x 1-3/4" and holes 1-1/2" centers. They seem to be unused. I have an invoice from the original sale at $86/set, so I will sell for $40/set.
More pads with the letters MNTX M128GG. Both large and small sets have the same letters. They also fit the calipers above - large to large, small to small. Not sure of maker, but I figure they are quality pads so I will price them the same -- $40/set
There is one set of pads with rivets. They fit the larger caliper. Same price, $40/set.
Brake rotors:
Larger, drilled pair, Hewland/CV joint mounting - 9-3/4" OD, approx. 5/16" thick, from outside sfc to outside sfc is 1-1/4" and the hat has a slope. $100/set
Smaller, re-drilled mounting holes, Hewland/CV joint mounting - 9-1/16" OD, approx. 1/4" thick, approx. 7/8" from outside sfc to sfc. - $50/set
Single rotor for front axle - 9-1/2" OD, 1/4" thick, 7/8" sfc to sfc - $25
Springs - all $40/pr:
I measured the wire diameter and counted the number of coils and used an internet site to gauge the #, so please feel free to ask questions. All 2.25" ID
470#, 8.5" long, 8 coils, 13/32" wire diam
450#, 6.25" long, 6 coils, 3/8" wire diam
350#, 8" long, 8 coils, 3/8" wire diam
325#, 8" long, these are marked 325#
One pair of Bilstein shocks - $75/pr - stamped with what looks like 0JJ00J32950, 6.5" from center eye to bottom of body, 4.25" rod length to center eye (assuming this is extended)
One pair Carrera shocks - $40 - cannot see part # stamp; 6.75"center eye to bottom of body, 4.25" rod to center eye
One pair Carrera shocks - $40 - stamped 3344, 8.75" center eye to bottom of body, 5" rod to center eye
Several Master cylnders, including Girling and Willwood - $25 each
Oil filter mount - $25 (note - I could not get the plugs out of the other side so could not use this as this is where I wanted to install my oil temp sensor)
Thanks for browsing!
David
757-470-7083 or dk540@yahoo.com
email or text is best as I'll be wrapped up in the car all weekend and it may not be convenient to answer the phone.
Brake Calipers, 2 larger and 2 smaller. The larger seem to be Girling, as that seem to be a G in the center. I don't know what the smaller ones are. $50 each
Brake Pads, lots of 'em! At least two Red sets (4 pads = 1 set) appear to be KFP. The larger ones fit the larger calipers, above, and the smaller ones fit the small calipers above. The larger ones are approx. 2-7/16" x 2" (+the ears with holes), from holes center to center they are 1-7/8"; smaller 2-1/8" x 1-3/4" and holes 1-1/2" centers. They seem to be unused. I have an invoice from the original sale at $86/set, so I will sell for $40/set.
More pads with the letters MNTX M128GG. Both large and small sets have the same letters. They also fit the calipers above - large to large, small to small. Not sure of maker, but I figure they are quality pads so I will price them the same -- $40/set
There is one set of pads with rivets. They fit the larger caliper. Same price, $40/set.
Brake rotors:
Larger, drilled pair, Hewland/CV joint mounting - 9-3/4" OD, approx. 5/16" thick, from outside sfc to outside sfc is 1-1/4" and the hat has a slope. $100/set
Smaller, re-drilled mounting holes, Hewland/CV joint mounting - 9-1/16" OD, approx. 1/4" thick, approx. 7/8" from outside sfc to sfc. - $50/set
Single rotor for front axle - 9-1/2" OD, 1/4" thick, 7/8" sfc to sfc - $25
Springs - all $40/pr:
I measured the wire diameter and counted the number of coils and used an internet site to gauge the #, so please feel free to ask questions. All 2.25" ID
470#, 8.5" long, 8 coils, 13/32" wire diam
450#, 6.25" long, 6 coils, 3/8" wire diam
350#, 8" long, 8 coils, 3/8" wire diam
325#, 8" long, these are marked 325#
One pair of Bilstein shocks - $75/pr - stamped with what looks like 0JJ00J32950, 6.5" from center eye to bottom of body, 4.25" rod length to center eye (assuming this is extended)
One pair Carrera shocks - $40 - cannot see part # stamp; 6.75"center eye to bottom of body, 4.25" rod to center eye
One pair Carrera shocks - $40 - stamped 3344, 8.75" center eye to bottom of body, 5" rod to center eye
Several Master cylnders, including Girling and Willwood - $25 each
Oil filter mount - $25 (note - I could not get the plugs out of the other side so could not use this as this is where I wanted to install my oil temp sensor)
Thanks for browsing!
David
757-470-7083 or dk540@yahoo.com
email or text is best as I'll be wrapped up in the car all weekend and it may not be convenient to answer the phone.
Yes, another Garage Sale!
Aucun commentaire:
Enregistrer un commentaire